Brother International BAS-375E Instruction Manual - English - Page 9
INSTALLATION, 1.Connecting the ground wire, 2. Positioning
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Chapter 3 INSTALLATION Chapter 3 INSTALLATION CAUTION Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine head weighs more than 65 kg. The installation should be carried out by two or more people. Do not connect the power cord until installation is complete, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury. Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a serious electric shock. Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and diarrhoea. Keep the oil out of the reach of children. Avoid setting up the sewing machine near sources of strong electrical noise such as highfrequency welding equipment. If this precaution is not taken, incorrect machine operation may result. 1. Connecting the ground wire DANGER Be sure to connect the gound. If the ground connection is not secure, you run the risk of receiving a serious electric shock. Red White Black 3-phase power supply Green/Yellow ....... Connect to ground Connection method for 3-phase power supply 2. Positioning Note G Disconnect the power supply from the special socket afrer install has been completed. G Be sure to connect the ground. If it is not connected, damage to the machine, incorrect operation and electric shocks may result. Decide the position for the sewing machine. Loosen nuts of six level adjusters q. Lower the level adjusters and secure them with nuts w. Turning the level adjuster counterclockwise will raise its height and turning it clockwise will lower it. Note If the level adjusters are not secured properly, the w machine may move during operation, which could q result in injury or damage. BAS-364E, 366E, 370E, 375E 3