Brother International BAS-375E Instruction Manual - English - Page 34
Using single split mode
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 5 OPERATING PROCEDURE 9. Using single split mode By using single split mode, it is possible to change up to 100 patterns immediately. t A B 12345678 12345678 y !2 !7 1. Move DIP switch B No. 1 to the ON position. This will activate single split mode. (Refer to "Chapter 10 DIP SWITCH".) 2. Turn on the power read in the patterns which have been programmed for split sewing. 3. Press the MENU switch y until the SPLIT NO. indicator !1 is illuminated. "1" will then appear in the display screen t. Then, while pressing the STEP BACK switch !,7 turn the dial !2 to change the contents appearing on the display screen t in order. Note If three patterns have been programmed for split sewing, the number on the display screen changes in the following order: "1" / "2" / "3" / "1" / "2"... q w e 4. When the start switch is pressed, only the pattern displayed on the display screen t will be sewn. Note As to split sewing, refer to the instruction manual of the programmer. BAS-364E, 366E, 370E, 375E 28