Brother International BAS-375E Instruction Manual - English - Page 67

OPERATION FLOW CHART OPERATION FLOW CHART Start To change pattern Power switch ON Power switch ON Insert floppy disk Press the PROGRAM No. select switch Press the Program Read/Write switch Restart Depress work clamp lift switch Depress work clamp lift switch Test switch ON Depress start switch Depress start switch Test switch OFF Press the PROGRAM No. select switch Select the program Reads program from disk Press the Program Read/ Write switch Press the work clamp lift switch (if the work clamp is down) Work clamp rises Set the work piece Work clamp descends Depress work clamp lift switch Read program from disk Work clmap rises (Replace presser foot, feed plate, confirm needle descent) (Set material in place) Work clamp descends TEST indicator illuminates Work clamp stops at sewing start position Feed drive (confirm needle descent, stepping foot and work clamp operation) Feed stop TEST indicator goes out When thread breaks or bobbin thread runs out Press emergency stop switch Machine stops, alarm sounds Remove problem Press emergency stop switch Thread trimmer operates, alarm stops Press STEP BACK switch Press STEP BACK switch Work clamp moves one stitch at a time in reverse Work clamp stops Depress start switch Machine, feed operate Max. 2,000 rpm or 3,200 rpm Thread trimming Stop Work clamp rises One machine cycle completed BAS-364E, 366E, 370E, 375E 61