Brother International BAS-375E Instruction Manual - English - Page 20
Winding the lower thread
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4. Winding the lower thread Chapter 4 CORRECT OPERATION CAUTION Do not touch any of the moving parts or press any objects against the machine while the bobbin is turning, as this may result in personal injury or damage to the machine. Note Do not touch the bobbin or the bobbin holder while the bobbin is turning, otherwise injury may result. q 0 1 4 ON OFF w 2 3 series e y q r t 1. Slide the bobbin all the way onto the spindle. 2. Thread the thread as shown in the illustration (in the case of the BAS-364E and 366E, there is no lower thread guide u), wind the thread around the bobbin several time in the direction shown by the arrow, and then press the bobbin presser q. 3. Turn the power switch w on. G The power indicator on the operation panel will light. 4. Press and hold the STEP BACK switch e on the operation panel, and depress the start switch r to start the sewing machine. G Keep the start switch depressed until the bobbin is fully wound. G Release the STEP BACK switch e when the sewing machine starts. 5. The bobbin holder q will automatically return when the bobbin is filled to capacity (approximately 80 - 90 % of the bobbin diameter). 6. Release the start switch r. 7. Remove the bobbin, and pull the bobbin in the direction of the arrow to cut the thread on the thread cutter t. 8. To wind more thread onto the bobbin, loosen the set screw y and move the bobbin holder q out in the direction of the arrow. BAS-364E, 366E, 370E, 375E 14