Brother International BAS-375E Instruction Manual - English - Page 33
Using the STEP BACK switch
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 5 OPERATING PROCEDURE 8. Using the STEP BACK switch CAUTION Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. This switch is used to move the machine one stitch at a time in the reverse sewing direction to enable resewing in the event the thread breaks or the bobbin thread runs out in mid-pattern. Use this switch to return to the point where the thread broke or ran out. 1. Press the emergency, stop switch q while the machine is running. (All operations will stop and the emergency stop lamp will illuminate.) q 2. Press the reset switch w. (The emergency stop lamp will go out.) w !6 !5 !7 3. Press the STEP BACK switch !.7 (The work clamp will move stitch by stitch in the opposite direction while the STEP BACK switch !7 is being pressed.) 4. When the work clamp has returned to the desired position, release the STEP BACK switch !7. (If the work clamp is stopped too soon, press the STEP BACK switch !7 again to resume work clamp movement.) 5. The machine will start sewing when the start switch e is pressed. e BAS-364E, 366E, 370E, 375E 27