Brother International BAS-375E Instruction Manual - English - Page 47
DEVICES, 1. Needle thread presser, 2. Beam sensor-type needle thread breakage detector
View all Brother International BAS-375E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 8 DEVICES Chapter 8 DEVICES Some of the specifications include optional devices as standard equipment. 1. Needle thread presser G The needle thread presser is used to enable the needle thread to be securely sewn underneath the material. G The needle thread presser presses the needle thread when the needle is lowered for the first stitch at the sewing start, and releases the needle thread when the needle comes out of the needle plate. Selecting the needle thread presser The needle thread presser can be set to operate or not operate by means of tne memory switch. 2. Beam sensor-type needle thread breakage detector The needle thread detection mechanism is a beam sensor-type which can quickly detect thread breakage even though it does not contact the thread. Selecting thread breakage detection The thread breakage detection mechanism can be set to operate or not operate by means of DIP switch A-8. Note Always be sure to turn off the power when changing the DIP switch settings. Beam sensor-type needle thread breakage detector DIP switch A-8 G Normally A-8 is OFF and the thread breakage detection mechanism does not operate. G When A-8 is ON, the thread breakage detection mechanism operates. A B 12345678 12345678 BAS-364E, 366E, 370E, 375E 41