Brother International DCP 8045D Users Manual - English - Page 238
Print Quality Difficulties, Network Difficulties, DIFFICULTY, SUGGESTIONS, Setting the Paper Type
UPC - 012502610335
View all Brother International DCP 8045D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
DIFFICULTY SUGGESTIONS Print Quality Difficulties Printed pages are curled. Thin or thick paper below the standard can cause this problem. Make sure you select the Paper Type that suits the media type you use. (See Setting the Paper Type on page 4-1 and Media Type on page 7-4.) Printed pages are smeared. The Paper Type setting may be incorrect for the type of print media you are using-OR-The print media may be too thick or have a rough surface. (See Setting the Paper Type on page 4-1 and Media Type on page 7-4.) Printouts are too light. Set Toner Save mode to off in the Advance tab in the printer driver. (See Toner Save Mode on page 7-6.) Network Difficulties I cannot print over the Network Make sure that your DCP is powered on and is On Line and in Ready mode. Press the Test switch. Then the current settings of the NC-9100h are printed.Verify that the cabling and Network connections are good. If possible, try connecting the DCP to a different port on your hub using a different cable. Check to see if there is any LED activity. The NC-9100h has a two color LED for diagnosing problems. 14 - 13 TROUBLESHOOTING AND ROUTINE MAINTENANCE