Brother International DCP 8045D Users Manual - English - Page 241
White lines down the skewed
UPC - 012502610335
View all Brother International DCP 8045D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Examples of poor print quality ABCDEFGH abcdefghijk ABCD abcde 01234 Black toner marks across the page ABCDEFGH abcdefghijk ABCD abcde 01234 White lines across the page ABCDEFGH abcdefghijk ABCD abcde 01234 Lines across the page ABCDEFGH abcdefghijk ABCD abcde 01234 Black lines down the page Printed pages have toner stains down the page. ABCDEFGH abcdefghijk ABCD abcde 01234 White lines down the page aAAa0bBbc1CBdDec2EfCgdF3hGDie4jHk Page skewed Recommendation The drum unit may be damaged. Put in a new drum unit. (See Replacing the drum unit on page 14-30.) Make sure that you use paper that meets our specifications. (See About paper on page 2-1.) If you use label sheets for laser printers, the glue from the sheets may sometimes stick to the OPC drum surface. Clean the drum unit. (See Cleaning the drum unit on page 14-23.) Do not use paper that has clips or staples because they will scratch the surface of the drum. If the unpacked drum unit is in direct sunlight or room light, the unit may be damaged. Make sure that you use paper that meets our specifications. A rough surfaced paper or thick print media can cause the problem. Make sure that you select the appropriate media type in the printer driver. The problem may disappear by itself. Try printing multiple pages to clear this problem, especially if the printer has not been used for a long time. The drum unit may be damaged. Put in a new drum unit. (See Replacing the drum unit on page 14-30.) Clean the inside of the printer and the primary corona wire in the drum unit. (See Cleaning the drum unit on page 14-23.) The drum unit may be damaged. Put in a new drum unit. (See Replacing the drum unit on page 14-30.) Clean the primary corona wire of the drum unit. Make sure the primary corona wire cleaner is at the home position (▲). The drum unit may be damaged. Install a new drum unit. (See Replacing the drum unit on page 14-30.) The toner cartridge may be damaged. Put in a new toner cartridge. (See Replacing the toner cartridge on page 14-24.) Make sure that a torn piece of paper is not inside the printer covering the scanner window. The fixing unit may be smudged. Call Customer Service. You may clear the problem by wiping the scanner window with a soft cloth. (See Cleaning the printer on page 14-22.) The toner cartridge may be damaged. Put in a new toner cartridge. (See Replacing the toner cartridge on page 14-24.) Make sure the paper or other print media is loaded properly in the paper tray and that the guides are not too tight or too loose against the paper stack. Set the paper guides correctly. If you are using the manual feed tray (or the multi-purpose tray). (See How to load paper on page 2-5.) The paper tray may be too full. Check the paper type and quality. (See About paper on page 2-1.) TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 16