Brother International DCP 8045D Users Manual - English - Page 268
Brother International DCP 8045D - B/W Laser - All-in-One Manual
UPC - 012502610335
View all Brother International DCP 8045D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
Step 2: Connecting the NC-9100h to an Unshielded Twisted Pair 10BASE-T or 100BASE-TX Ethernet Network To connect the NC-9100h to a 10BASE-T or 100BASE-TX Network, you must have an Unshielded Twist Pair Cable. One side of the cable must be connected to a free port on your Ethernet hub and the other side must be connected to the 10BASE-T or 100BASE-TX connector (an RJ45 Connector) of the NC-9100h. Verifying successful hardware Installation: Plug in the AC power cord. After initialization and warm-up (this may take several seconds), the DCP will come to a Ready state. LED No light: If both of the two LEDs are off, then the print server is not connected to the network. Link/Speed LED is orange: Fast Ethernet This Link/Speed LED will be orange if the print server is connected to a 100BASETX Fast Ethernet network. 15 - 9 OPTIONAL ACCESSORIES