Brother International HL 1240 Service Manual - Page 304
Image defect, examples, Recommendation
UPC - 012502600855
View all Brother International HL 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
Image defect examples Recommendation • If the problem is not solved after printing a few pages, the drum unit may have glue from label stock on the OPC drum surface. Clean the drum unit as follows 94 mm (3.7 in.) 94 mm (3.7 in.) 1. Position the print sample in front of the drum unit, and find the exact position of the image defect. White Spots Printed pages have white spots in black text and graphics at intervals of 94 mm (3.7 in.). 94 mm (3.7 in.) 94 mm (3.7 in.) Fig.4-11 Find the exact position of the image defect 2. Turn the drum unit gear by hand while looking at the surface of the OPC drum. Black Spots Printed pages have black spots at intervals of 94 mm (3.7 in.). Fig. 4-12 Turn the drum gear 3. When you have located the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or paper powder on the surface comes off. Fig. 4-13 Wipe the surface of the OPC drum 4-20