Brother International HL 1240 Service Manual - Page 85
from either end.
UPC - 012502600855
View all Brother International HL 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY (16) Remove the heat roller cleaner complete with the cleaner spring from the fixing unit frame by lifting it upwards until the spring releases from the frame. (17) Remove the cleaner spring from the heat roller cleaner. Heat roller cleaner Cleaner spring Fixing unit frame Cleaner spring Heat roller cleaner Fig. 4-38 NOTE: When re-assembling the heat roller cleaner complete with the cleaner spring onto the fixing unit frame, ensure the direction of the roller is correct referring to the figure above. Ensure also that the spring is seated correctly in the locating channel and does not protrude from either end. (18) Remove the pressure roller from the fixing unit cover by gently levering the right hand side upwards to release it from the bearing and then sliding it to the right to remove it. (19) Remove the pressure roller cleaner complete with the cleaner spring from the fixing unit cover by lifting it upwards until the spring releases from the cover. (20) Remove the cleaner spring from the pressure roller cleaner. Pressure roller Pressure roller cleaner Fixing unit cover Fig. 4-39 Cleaner spring Pressure roller cleaner 4-22