Brother International HL 1240 Service Manual - Page 94

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY 3.15 Panel PCB ASSY NOTE: Be sure to remove the drive unit and disconnect the panel PCB connector on the engine PCB before removing the panel PCB ASSY. (1) Remove the M3x6 Taptite screw, then remove the panel PCB ASSY. Panel PCB Fig. 4-52 Taptite, cup M3x6 3.16 Solenoid ASSY NOTE: Be sure to remove the drive unit and disconnect the solenoid connector on the engine PCB before removing the solenoid ASSY. (1) Place the main frame so that the drive unit side is at the top. (2) Release the catch and remove the planetary gear from the paper pick-up roller shaft. (3) Remove the planetary gear from the paper feed roller shaft and gear 56. (catch) Planetary gear (for paper pick-up roller) Gear 56 Main frame Planetary gear (for paper pick-up roller) Solenoid Planetary gear (for paper feed roller) Fig. 4-53 4-30