Brother International HL 1240 Service Manual - Page 87
Remove the eight eject pinch rollers and pinch springs by lifting them upwards until
UPC - 012502600855
View all Brother International HL 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY (22) Press the two catches holding the idle gear 13 to the frame and then remove the idle gear 13. Slide the first eject roller to the left until the slot in the roller shaft aligns with the slot in the frame and then remove the roller by pulling it forwards. Fixing unit frame First eject roller Idle gear 13 Fig. 4-42 (23) Remove the eight eject pinch rollers and pinch springs by lifting them upwards until the springs release from the frame. Fixing unit frame Eject pinch roller Fig. 4-43 4-24 Pinch spring
CHAPTER 4
DISASSEMBLY AND RE-ASSEMBLY
4-24
(22) Press the two catches holding the idle gear 13 to the frame and then remove the idle gear
13.
Slide the first eject roller to the left until the slot in the roller shaft aligns with the slot in
the frame and then remove the roller by pulling it forwards.
Fig. 4-42
(23) Remove the eight eject pinch rollers and pinch springs by lifting them upwards until the
springs release from the frame.
Fig. 4-43
Fixing unit frame
Idle gear 13
First eject roller
Fixing unit frame
Pinch spring
Eject pinch roller