Brother International HL 1240 Service Manual - Page 96
When removing the solenoid, the solenoid rod and spring may come off., Be careful not to, loose them
UPC - 012502600855
View all Brother International HL 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY (6) Turn the main frame upside down. (7) Remove the two M3x6 Taptite screws and release the solenoid harness from the hook and remove the cassette guide L/F. Step (7) Taptite, cup M3x6 Cassette guide L/F Fig. 4-56 (8) Remove the M3x4 screw and the tape on the solenoid harness and remove the solenoid ASSY. Main frame Tape Spring Rod Solenoid ASSY Screw, bind M3x4 Fig. 4-57 ! CAUTION: When removing the solenoid, the solenoid rod and spring may come off. Be careful not to loose them. (Refer to the figure above.) 4-32
CHAPTER 4
DISASSEMBLY AND RE-ASSEMBLY
4-32
(6) Turn the main frame upside down.
(7)
Remove the two M3x6 Taptite screws and release the solenoid harness from the hook and
remove the cassette guide L/F.
Fig. 4-56
(8)
Remove the M3x4 screw and the tape on the solenoid harness and remove the solenoid
ASSY.
Fig. 4-57
!
CAUTION:
When removing the solenoid, the solenoid rod and spring may come off.
Be careful not to
loose them.
(Refer to the figure above.)
Taptite, cup M3x6
Cassette guide L/F
Screw, bind M3x4
Solenoid ASSY
Main frame
Tape
Rod
Step (7)
Spring