Brother International HL 1240 Service Manual - Page 86
When re-assembling the thermistor to the fixing unit frame, ensure the direction of
UPC - 012502600855
View all Brother International HL 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY NOTE: When re-assembling the pressure roller cleaner complete with the cleaner spring onto the fixing unit cover, ensure the direction of the roller is correct referring to the figure above. Ensure also that the spring is seated correctly in the locating channel and does not protrude from either end. (21) Release the thermistor harness from the hooks on the fixing unit frame and then remove the one M3x12 Taptite screw and remove the thermistor. (hooks) Thermistor Fixing unit frame Taptite, cup M3x12 Fig. 4-40 NOTE: When re-assembling the thermistor to the fixing unit frame, ensure the direction of the thermistor is correct referring to the figure below; Fixing unit frame Thermistor Taptite, cup M3x12 Fig. 4-41 4-23