Brother International HL 1240 Service Manual - Page 68

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY (5) Keeping the paper cassette upside down, release the pressure roller holder assembly from the cassette by releasing the metal mounting plate from the plastic retaining boss. Use a flat screwdriver to press the metal plate forwards until it clears the boss and then remove the pressure roller holder assembly downwards from the cassette. (6) Remove the cassette pressure roller from the assembly, then remove the pressure roller shaft from the pressure roller. (7) Remove the sponge holder ASSY from the holder. The two sponge holder springs will also come off. Pressure roller shaft Sponge holder ASSY Cassette pressure roller Sponge holder springs Pressure roller holder Paper cassette Pressure roller holder Flat screwdriver Fig. 4-7 (8) Keeping the paper cassette upside down, remove the two M2.6x5 Taptite screws. (9) Unhook the catches of each side guide, then press the lock lever towards the front of the cassette to release the pressure plate. Taptite, cup M2.6x5 Taptite, cup M2.6x5 Side guide L Side guide rack Paper cassette (Back side) Step (9) Lock lever (catches) Side guide rack Side guide L Fig. 4-8 4-6