Brother International Innov-is 6000D Operation Manual - Page 110

SEWING THE STITCHES ■ Overcasting Using the Side Cutter By using the side cutter, you can do overcasting while cutting the fabric. CAUTION • Recommended stitches are noted "S" in the lower right corner, therefore sure to only select one of these stitches listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury. Note • Thread the needle manually when using the side cutter, or only attach the side cutter after threading the needle using the "Automatic Threading" button. Stitch Stitch name With side cutter With side cutter With side cutter With side cutter With side cutter Presser foot Applications Straight stitch while cutting fabrics Stitch width [mm (inch)] Auto Manual 0.0 0.0 - 2.5 (0) (0 - 3/32) Stitch length [mm (inch)] Auto Manual 2.5 0.2 - 5.0 (3/32) (1/64 - 3/16) Zigzag stitch while cutting fabrics 3.5 (1/8) 3.5 - 5.0 1.4 (1/8 - 3/16) (1/16) 0.0 - 4.0 (0 - 3/16) Overcasting stitch while cutting fabrics 3.5 (1/8) 3.5 - 5.0 2.0 1.0 - 4.0 (1/8 - 3/16) (1/16) (1/16 - 3/16) Overcasting stitch while cutting fabrics 5.0 (3/16) 3.5 - 5.0 (1/8 - 3/16) 2.5 1.0 - 4.0 (3/32) (1/16 - 3/16) Overcasting stitch while cutting fabrics 5.0 (3/16) 3.5 - 5.0 (1/8 - 3/16) 2.5 1.0 - 4.0 (3/32) (1/16 - 3/16) Twin needle NO NO NO NO NO a Select a stitch. d Position the fork on the side cutter's operating lever onto the needle clamp screw. b Follow the steps presser foot. on page 54 to remove the c Thread the needle (see page 46). a Needle clamp screw b Operating lever Memo • Make sure that the fork of the operating lever is set onto the needle screw firmly. 96