Brother International Innov-is 6000D Operation Manual - Page 57

Setting the Bobbin Press o o o o in this order to display a video example of the operation on the LCD (see page 34). Follow the steps explained below to complete the operation. CAUTION • Use a bobbin thread that has been correctly wound. Otherwise, the needle may break or the thread tension will be incorrect. LOWER THREADING a Press . b Slide the bobbin cover latch to the right. 1 Getting Ready a Bobbin cover b Latch o The bobbin cover opens. c Remove the bobbin cover. d Hold the bobbin with your right hand and hold the end of the thread with your left hand. • The included bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, (SFB: XA5539-151)). e Set the bobbin in the bobbin case the thread unwinds to the left. so that * Actual size a This model b Other models c 11.5 mm (approx. 7/16 inch) • Before inserting or changing the bobbin, be sure to press in the LCD, otherwise injuries may occur if the "Start/Stop" button or any other button is pressed and the machine starts sewing. f Hold the bobbin lightly with your right hand, and then guide the thread with your left hand. 43