Brother International Innov-is 6000D Operation Manual - Page 352

ERROR MESSAGES This message is displayed when is pressed when changing thread colors. This message appears if the machine is turned off while sewing, then turned on again. Press to return the machine to the condition (pattern position and number of stitches) when it was turned off. Follow the procedure described in "If the Thread Breaks During Sewing" on page 224 to align the needle position and sew the remainder of the pattern. This message is displayed when the "Start/Stop" button is pushed and the machine is in embroidery mode, but the embroidery unit is not attached. This message is displayed when replacing the embroidering bobbin thread. 338 This message is displayed when rotating a saved combined pattern in the Embroidery screen. This message is displayed when the embroidery frame is attached. This message is displayed when the machine failed to recognize the embroidery positioning mark. - Confirm that the embroidery positioning mark is in the selected area. If problem persists, see pages 209 and 304 to reposition mark. - Machine failed to recognize printed positioning mark. Set "Page Scaling" to "None (100%)" and try printing the embroidery positioning mark again. (see pages 221 and 310) This message is displayed when the machine has recognized the embroidery position mark. Remove the embroidery positioning sticker and press to continue. To remove the embroidery positioning sticker more easily, press . (see pages 209 and 304)