Brother International Innov-is 6000D Operation Manual - Page 147
Eyelet
![]() |
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
SEWING THE STITCHES Eyelet Use this stitch for making belt holes and other similar applications. Stitch Stitch name Eyelet Star eyelet Presser foot Applications For making eyelets, holes on belts, etc. Stitch width [mm (inch)] Auto Manual Stitch length [mm (inch)] Auto Manual Twin needle 7.0 7.0 6.0 5.0 7.0 7.0 6.0 5.0 (1/4) (1/4 15/64 3/16) (1/4) (1/4 15/64 3/16) NO For making star-shaped eyelets on holes. - - - - NO a Select or . b Use in either the stitch width display or the stitch length display to choose the size of the eyelet. d Lower the presser foot and start sewing. 3 o When sewing is finished, the machine sews reinforcement stitches and stops automatically. Note • If the stitch pattern comes out poorly, make adjustments to "SEWING STITCH PATTERNS" on page 152. Utility Stitches e Use the eyelet punch to center of the stitching. make a hole in the * Actual size a Large 7 mm (approx. 1/4 inch) b Medium 6 mm (approx. 15/64 inch) c Small 5 mm (approx. 3/16 inch) Note • Only one size is available for . c Attach monogramming foot "N", then rotate the handwheel toward you (counterclockwise) to check the needle drop position. a Needle drop position 133
![](/manual_guide/products/brother-international-innovis-6000d-operation-manual-5f1957e/147.png)