Brother International Innov-is 6000D Operation Manual - Page 130

SEWING THE STITCHES Crazy Quilting For a decorative look called "Crazy Quilting", the following stitches can be sewn on top of a pressed seam allowance. a Select a straight foot "J". stitch and attach presser b With the right sides facing each other, sew two pieces of fabric together, and then press open the seam allowance. Smocking Stitches Use smocking stitches for decorative sewing on clothes, etc. a Select a straight foot "J". stitch and attach presser b Set the stitch length to 4.0 mm (approx. 3/16 inch) and loosen the upper thread tension to approximately 2.0 (see "Setting the Stitch Length" on page 67 and "Setting the Thread Tension" on page 67). c Pull the bobbin and upper threads 50 mm (approx. 1-15/16 inches). out by d Sew the seams, leaving approximately 10 mm (approx. 3/8 inch) between the seams, then trim excess thread, leaving 50 mm (approx. 1-15/16 inches). a Straight stitch b Seam margins c 6.5 mm (approx. 1/4 inch) d Wrong side c Select a stitch for top stitching. d Place the machine, fabric right side up in the and center the presser foot over the seam when sewing. a Approximately 10 mm (approx. 3/8 inch) e Pull the bobbin threads to obtain the desired amount of gather, and then smooth the gathers by ironing them. a Right side of fabric 116 f Select or . Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual.