Brother International Innov-is 6000D Operation Manual - Page 236

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS) d If an iron-on transfer sheet the image onto fabric. is used, transfer c Place the paper printed with the positioning image on top of the fabric so that the pattern is aligned, and then affix the paper to the fabric with cellophane tape to prevent the paper from moving. Memo • For details on transferring from iron-on transfer sheets, refer to the instructions for the iron-on transfer sheets. • If necessary, cut the iron-on transfer sheet to the size of the pattern before transferring the image. Sewing Embroidery Patterns a Hoop in the embroidery frame the with the background image ironed fabric on. a Cellophane tape d After checking that a pattern is selected, press . o The sewing screen appears. Note • Before embroidering, check that the embroidery position sheet is perfectly aligned with the background. e Align the embroidering position according to steps b through f of "Using the Built- In Camera to Align the Embroidering Position" on page 206. f Remove the positioning sheet and press the "Start/Stop" button to begin embroidering. b Cut the paper printed with the center positioning image so it can easily be positioned aligned with the background image on the fabric. * Lines or color changes in the image can help you find the correct alignment position. CAUTION • Before pressing the "Start/Stop" button to begin embroidering, remove the positioning sheet taped to the fabric in step c. 222