Brother International Innov-is 6000D Operation Manual - Page 199
Removing the Embroidery Unit
![]() |
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
c Turn the main power to ON. o The following message will appear. d Press . BEFORE EMBROIDERING c Hold down the release button, and pull the embroidery unit away from the machine. o The carriage will move to the initialization position. ■ Removing the Embroidery Unit a Press either or , then press . o The carriage will move to the removal position. CAUTION • Always remove the embroidery frame before pressing . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. • The embroidery unit will not fit in the storage case if this step is not done. b Turn the main power to OFF. Note • Be sure to turn off the machine before removing the embroidery unit, otherwise damage to the machine may result. a Release button CAUTION • Do not carry the embroidery unit by holding 5 the release button compartment. Embroidery 185
![](/manual_guide/products/brother-international-innovis-6000d-operation-manual-5f1957e/199.png)