Brother International Innov-is 6000D Operation Manual - Page 156
When the Fabric Edge Indicator Line Is
![]() |
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
SEWING THE STITCHES When the Fabric Edge Indicator Line Does Not Appear The built-in camera cannot detect the edge of the fabric. Note • If a straight part of fabric edge indicator line (shown below) does not follow the edge of the fabric, edge sewing cannot be sewn correctly. a b Press , and then perform the procedure again starting with step a. When the Fabric Edge Indicator Line Is Not Aligned With the Edge of the Fabric The fabric edge indicator line that appears is not aligned with the edge of the fabric. The fabric at the beginning of sewing is not straight. a Straight part b Fabric j While checking the screen for the distance from the fabric edge to the edge sewing position, move the fabric to the desired position. * The starting point of the fabric edge indicator line shows the position for the start of sewing. The actual position for the start of sewing is directly below the needle and parallel to the starting point. Try to straighten the edge of the fabric at the beginning of sewing (so it is parallel with the edge of the presser foot). a 142 a Distance from edge of fabric
![](/manual_guide/products/brother-international-innovis-6000d-operation-manual-5f1957e/156.png)