Brother International Innov-is 6000D Operation Manual - Page 231

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS) PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS) Completed embroidery patterns combined with printed designs are built into this machine. Beautiful three-dimensional embroidered designs can be created by ironing a background onto fabric or printing it onto printable fabric, then sewing complementary embroidery on top of the background. Using iron-on paper Using printable fabric 5 Embroidery Step1 Select a pattern to be combined with the background image. o See "Selecting a Pattern" on page 218. Step2 Output from the machine the background image and the positioning image. o See "Outputting the Background Image and Positioning Image" on page 219. Step3 When using iron-on paper With a printer, print the background onto iron-on paper, and print the embroidery position sheet on plain paper. Then, iron the background image onto fabric. When using printable fabric With a printer, print the background onto printable fabric, and print the embroidery position sheet on plain paper. o See "Printing the Background and Embroidery Position Sheet" on page 221. Step4 Hoop in the embroidery frame the fabric with the background image ironed on or printed, check the embroidering position, and then start embroidering. o See "Sewing Embroidery Patterns" on page 222. Note • Print the background and embroidery position sheet in their original dimensions. If an image is printed in a different size, the sizes of the embroidery pattern and background may not match. In addition, the built-in camera cannot detect the embroidery position mark. Make sure that the print settings are correctly specified. 217