Brother International Innov-is 6000D Operation Manual - Page 316
Using the Built-In Camera to, Align the Embroidering Position
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
VARIOUS EMBROIDERING FUNCTIONS Using the Built-In Camera to b After selecting the pattern, press , and then press . Align the Embroidering Position The embroidering positioning can easily be aligned using the machine's built-in camera and the included embroidery positioning sticker. Note • When embroidery frame (small) is installed, the built-in camera cannot be used to align the embroidering position. Install embroidery frame (medium) or a larger embroidery frame. a Affix the embroidery positioning the location in the fabric to be sticker to embroidered. Place the embroidery positioning sticker so that the center of the larger circle is at center of the embroidery pattern. a Embroidery positioning sticker b Center of the embroidery pattern c Embroidery field Note • When inserting the fabric in the embroidery frame, check that the embroidery pattern fits within the embroidery field for the frame that is used. o A window appears so that the area containing the embroidery positioning sticker can be selected. a Embroidery field b Embroidery pattern c Embroidery positioning sticker • Depending on the type of fabric that is used, a part of the embroidery positioning sticker may remain attached when it is peeled off. Before using the embroidery positioning sticker, check that it can be cleanly removed from a scrap piece of the fabric to be used. 302