Brother International Innov-is 6000D Operation Manual - Page 340

CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION • Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. Cleaning the LCD Screen a Press the "Needle the needle. Position" button to raise If the screen is dirty, gently wipe it with the included LCD cleaning cloth or a soft, dry cloth. Do not use organic solvents or detergents. Note • Do not wipe the LCD screen with a damp cloth. Memo • Occasionally, condensation may form on the LCD screen or it may become fogged up; however, this is not a malfunction. After a while, the cloudiness will disappear. b Turn the main power to OFF. c Remove the needle and the presser holder (see pages 55 through 56). foot d Remove the flat bed attachment or the embroidery unit if either is attached. e Grasp both sides of the needle and then slide it toward you. plate cover, Cleaning the Machine Casing If the surface of the machine is dirty, lightly soak a cloth in a neutral detergent, squeeze it out firmly, and then wipe the surface. Then wipe again with a dry cloth. Cleaning the Race a Needle plate cover → The needle plate cover is removed. f Grasp the bobbin case, and then pull it out. If dust or bits of dirt collect in the race or bobbin case, the machine will not run well, and the bobbin thread detection function may not operate. Keep the machine clean for best results. Press → → → → in this order to display a video example of cleaning the race (see page 34). Follow the steps explained below to complete the operation. a Bobbin case 326