Brother International Innov-is 6000D Operation Manual - Page 58
Insert the tab in the lower-left corner of
![]() |
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
LOWER THREADING g Pass the thread pull the thread through the guide, and out toward the front. then h Insert the tab bobbin cover in the lower-left corner of (1), and then lightly press the down on the right side to close the cover (2). a Cutter o The cutter cuts the thread. Note • If the thread is not correctly inserted through the tension spring of the bobbin case, it may cause incorrect thread tension. (see page 67) a Tension spring CAUTION • Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly. Otherwise, the thread may break or the thread tension will be incorrect. 44
![](/manual_guide/products/brother-international-innovis-6000d-operation-manual-5f1957e/58.png)
LOWER THREADING
44
g
Pass the thread through the guide, and then
pull the thread out toward the front.
a
Cutter
±
The cutter cuts the thread.
h
Insert the tab in the lower-left corner of the
bobbin cover (1), and then lightly press
down on the right side to close the cover
(2).
Note
•
If the thread is not correctly inserted through
the tension spring of the bobbin case, it may
cause incorrect thread tension. (see page
67)
a
Tension spring
CAUTION
•
Be sure to hold down the bobbin with your
finger and unwind the bobbin thread
correctly. Otherwise, the thread may break or
the thread tension will be incorrect.