Brother International Innov-is 6000D Operation Manual - Page 127
If the Needle Catches Too Much of, the Hem Fold, If the Needle does not Catch the, Hem Fold
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
■ If the Needle Catches Too Much of the Hem Fold The needle is too far to the left. Press to decrease the stitch width so that the needle slightly catches the fold of the hem. SEWING THE STITCHES Appliqué a Use a temporary spray adhesive, fabric glue or a basting stitch to attach the appliqué to the fabric. * This will keep the fabric from moving during sewing. a Wrong side of fabric b Right side of fabric ■ If the Needle does not Catch the Hem Fold The needle is too far to the right. Press to increase the stitch width so that the needle slightly catches the fold of the hem. a Wrong side of fabric b Right side of fabric l Sew with the fold of the hem against the presser foot guide. m Remove the the fabric. basting stitching and reverse 3 Utility Stitches a Appliqué b Fabric glue b Select or . * Adjust the stitch length and width to correspond to the appliqué shape, size, and quality of material (see page 66). Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. c Attach needle presser foot "J". Check that the drops slightly off the edge of the appliqué, then start sewing. a Appliqué material a Wrong side of fabric b Right side of fabric a Needle drop position 113