Brother International Innov-is 6000D Operation Manual - Page 150
Inserting a Side Zipper
![]() |
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
SEWING THE STITCHES c Press the seam allowance open the zipper with a basting stitch and attach in the middle of each side of the zipper tape. e Topstitch 3/8 inch) 7 to 10 mm (approx. 1/4 from the seamed edge of to the fabric, then remove the basting. a Basting stitches b Zipper c Wrong side d Remove presser foot "J". Align the right side of the pin in zipper foot "I" with the presser foot holder, and attach the zipper foot. CAUTION • Make sure the needle does not strike the zipper during sewing. If the needle strikes the zipper, the needle may break, leading to injury. ■ Inserting a Side Zipper Use for side zippers in skirts or dresses. a Select . a Right b Left c Needle drop position CAUTION • When using zipper foot "I", make sure the straight stitch, middle needle position is selected. Rotate the handwheel toward you (counterclockwise) to make sure the needle does not strike the presser foot. If another stitch is selected, the needle will strike the presser foot, causing the needle to break and possibly causing injury. Note • Make sure you sew using the middle needle position. 136
![](/manual_guide/products/brother-international-innovis-6000d-operation-manual-5f1957e/150.png)