Brother International Innov-is 6000D Operation Manual - Page 351

This message is displayed when a key on the LCD display is touched while the needle is in the down position. This message is displayed when there are too many characters and the curved character configuration is impossible. This message is displayed when the machine is in embroidery mode, and the character pattern combination is too large to fit in the embroidery frame. This message is displayed when the machine is in embroidery mode and the combined character pattern is too large for the embroidery frame. You can rotate the pattern 90 degrees and continue combining characters. ERROR MESSAGES This message is displayed when the machine is in embroidery mode and the embroidery unit tries to initialize while the embroidery frame is attached. This message is displayed when the machine is ready to sew an embroidery pattern, and the "Start/Stop" button is pushed while the embroidery frame is not attached. This message is displayed when the machine is in embroidery edit mode, and you try to use an editing function when the pattern is not completely within the red outline. This message is displayed when you try to save a copyright protected pattern to USB media/Computer. According to copyright laws, patterns that are illegal to reproduce or edit cannot be saved to USB media or computer. If this message displays, save the pattern in the machine's memory. This message is displayed when the machine is in embroidery mode and the small frame is attached, and the selected pattern does not fit in the small frame. This message appears when embroidery frame (small) is attached while aligning the embroidery position using the built-in camera. Appendix 8 337