Brother International Innov-is 6000D Operation Manual - Page 134
Hemstitching 3 Drawn Work 2
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
SEWING THE STITCHES d Press stitch. to create a mirror image of the e Match beginning needle drop points on the opposite edge of the open area to keep the stitching symmetrical. c Sew the decorative stitch in the the five threads created above. center of ■ Hemstitching (3) (Drawn Work (2)) a Pull out several threads from both sides of the 4 mm (approx. 3/16 inch) area which are not yet open. * Pull out four threads, leave five threads, and then pull out four threads. The width of five threads is approximately 4 mm (approx. 3/16 inch) or less. Memo • A wing needle can be used for Hemstitching (3). a Approx. 4 mm (approx. 3/16 inch) or less b Four threads (pull out) c Five threads (leave) b Select . Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. 120