Brother International Innov-is 6000D Operation Manual - Page 136

SEWING THE STITCHES One-step buttonholes are sewn from the front of the presser foot to the back, as shown below. a Reinforcement stitching a Select a buttonhole stitch, buttonhole foot "A". and attach b Mark the position and length buttonhole on the fabric. of the c Pull out the button holder plate on the presser foot, and insert the button that will be put through the buttonhole. Then tighten the button holder plate around the button. Memo • The maximum buttonhole length is about 28 mm (approx. 1-1/16 inches) (diameter + thickness of the button). a Button holder plate Memo • The size of the buttonhole is determined by the size of the button in the button holder plate. d Align the presser foot with the mark fabric, and lower the presser foot. on the 122 A a Mark on the fabric b Marks on the presser foot