Brother International Innov-is 6000D Operation Manual - Page 126

SEWING THE STITCHES e Unfold the edge of fabric, and position fabric with the wrong side facing up. the j Position the fabric with the edge of folded hem against the guide of the the presser foot, and then lower the presser foot lever. * Seen from the side a Wrong side of fabric b Basting line c Bottom edge of fabric f Attach blind hem foot "R". g Select or . a Wrong side of fabric b Fold of hem c Guide k Adjust the stitch width until the needle slightly catches the fold of the hem. a Needle drop point When you change the needle drop point, raise the needle, and then change the stitch width. h Remove the free-arm. flat bed attachment to use the i Slide the item that you wish to sew onto the free arm, make sure that the fabric feeds correctly, and then start sewing. a Stitch width Memo • Blind hem stitches cannot be sewn if the left needle drop point does not catch the fold. If the needle catches too much of the fold, the fabric cannot be unfolded and the seam appearing on the right side of the fabric will be very large, leaving an unattractive finish. If you experience either of these cases, follow the instructions below to solve the problem. 112 a Free arm