Brother International Innov-is 6000D Operation Manual - Page 70
Changing The Needle
![]() |
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
CHANGING THE NEEDLE CHANGING THE NEEDLE CAUTION • Always press on the screen before changing the needle. If is not pressed and the Start/ Stop button or another operation button is pressed accidentally, the machine will start and injury may result. • Use only sewing machine needles made for home use. Other needles may bend or break and may cause injury. • Never sew with a bent needle. A bent needle will easily break and may cause injury. Press o o o The entire screen becomes white, and all keys and o operation buttons are locked. o in this order to display a video example of the operation on the LCD (see page 34). Follow the steps explained below to complete the operation. Memo • To check the needle correctly, place the flat side of the needle on a flat surface. Check the needle from the top and the sides. Throw away any bent needles. Note • Before replacing the needle, cover the hole in the needle plate with fabric or paper to prevent the needle from falling into the machine. c Use the screwdriver to toward the front of the turn the screw machine and loosen the screw. Remove the needle. a Parallel space b Level surface (bobbin cover, glass, etc.) a Press the "Needle the needle. Position" button to raise Note • Do not apply pressure to the needle clamp screw. Doing so may damage the needle or machine. b Press . * If the message "OK to automatically lower the presser foot?" appears on the LCD screen, press OK to continue. 56
![](/manual_guide/products/brother-international-innovis-6000d-operation-manual-5f1957e/70.png)