Brother International Innov-is 6000D Operation Manual - Page 312

VARIOUS EMBROIDERING FUNCTIONS f Press to select the appliqué setting. Memo • Three steps are added to the sewing order: appliqué cutting line, position of pattern placement on the garment, and appliqué stitching. a b c a Cutting line for appliqué b Position of pattern placement on garment c Appliqué stitching Note • When is pressed, the pattern is moved to the center. After selecting the appliqué setting, move the pattern to the desired position. Memo • To cancel the setting, press . • If no pattern is selected, the key appears gray and cannot be selected. o The steps for creating the appliqué piece are added to the sewing order. Note • An appliqué piece cannot be created if the pattern is too large or too complicated or a combined pattern is separated. Even if the selected pattern fits within the embroidering area, the entire appliqué pattern may exceed the embroidering area when the outline is added. If an error message appears, select a different pattern or edit it. g Fuse back or of stick a piece of stabilizer to the the felt or denim fabric to be used as the appliqué piece. Note • For best results, be sure to use stabilizer material for embroidering. h Hoop the appliqué fabric in the embroidery frame, attach the embroidery frame to the machine, and then start embroidering. 298