Brother International MFC 3100C Users Manual - English - Page 39
Connections, EXT. TEL/TAD
UPC - 012502565819
View all Brother International MFC 3100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Do not connect a TAD elsewhere on the same phone line (unless you have the Distinctive Ring service). NO ! TAD TAD YES ! Connections The external TAD must be plugged into the back side of the MFC, into the jack labeled EXT. Your MFC cannot work properly if you plug the TAD into a wall jack (unless you are using Distinctive Ring). 1 Plug the telephone line cord from the wall jack into the back side of the MFC, in the jack labeled LINE. 2 Plug the telephone line cord from your external TAD into the back side of the MFC, in the jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD's telephone line jack, and not its telephone set jack.) 3 Set your external TAD to four rings or less. (The MFC's Ring Delay setting does not apply.) 4 Record the outgoing message on your external TAD (see below). 5 Set the TAD to answer calls. 6 Set the Receive Mode to EXT. TEL/TAD. (See Choosing the Receive Mode, page 6-1.) A S S E M B L Y A N D C O N N E C T I O N S 2 - 12