Brother International MFC 3100C Users Manual - English - Page 81

9 Remote Fax Options 9 (Not Available for Color Fax) Fax Forwarding/Paging You cannot use Paging and Fax Forwarding at the same time. You cannot use Paging and Fax Forwarding when Fax Storage is set to OFF. Programming a Fax Forwarding Number When Fax Forwarding is set to ON, your MFC stores the received fax in memory. Then it dials the fax number you've programmed and forwards the fax message. 1 Press Menu/Set, 2, 5, 1. 1.FAX FWD/PAGING 2 Press or until the LCD shows FAX FORWARD?, and then press Menu/Set. 3 The LCD prompts you to enter the fax number where faxes will be forwarded. Enter the forwarding number (up to 20 digits), and then press Menu/Set. 4 Press Stop/Exit. FWD#: Programming Paging Number When Paging is selected, your MFC dials the pager number you've programmed, and then dials your Personal Identification Number (PIN); this activates your pager so you will know that you have a fax message in the memory. 1 Press Menu/Set, 2, 5, 1. 1.FAX FWD/PAGING 2 Press or until the LCD shows PAGING?, and then press Menu/Set. 3 Enter your pager phone number (up to 20 digits) followed by # #, and then press Menu/Set. Do not include the area code if it is the same as that of your MFC. For example, 1 8 0 0 5 5 5 1 2 3 4 # #. PAG#: REMOTE FAX OPTIONS (NOT AVAILABLE FOR COLOR FAX) 9-1