Brother International MFC-J6920DW Basic Users Guide - Page 124
Disconnected, Basicfor VoIP, Document Jam/too Long, DR Mode in Use, Manual, High Temperature
View all Brother International MFC-J6920DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Error Message Disconnected Cause The other person or other person's fax machine stopped the call. Document Jam/too Long The document was not inserted or fed correctly, or the document scanned from the ADF was too long. DR Mode in Use The machine is in Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. High Temperature The room temperature is too high. Hub is Unusable. Image Too Long Image Too Small A hub or USB Flash drive with hub has been connected to the USB direct interface. The proportions of your photo are irregular so effects could not be added. The size of your photo is too small to trim. Action Try to send or receive again. If calls are stopped repeatedly and you are using a VoIP (Voice over IP) system, try changing the Compatibility to Basic(for VoIP). (See Telephone line interference / VoIP on page 139.) (See Using the ADF on page 45.) (See Document jam on page 119.) Set Distinctive Ring to Off. (See Turning off Distinctive Ring on page 66.) After cooling the room, allow the machine to cool down to room temperature. Try again later. Hubs, including a USB Flash drive that has a hub built in, are not supported. Unplug the device from the USB direct interface. Choose a regularly proportioned image. Choose a larger image. 110