Brother International MFC-J6920DW Basic Users Guide - Page 151
PhotoCapture Center™ Difficulties, Software Difficulties, Difficulty, Suggestions
View all Brother International MFC-J6920DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Troubleshooting PhotoCapture Center™ Difficulties Difficulty Removable Disk does not work correctly. Cannot access Removable Disk from the computer. Part of my photo is missing when printed. Suggestions 1 Take out the memory card or USB Flash drive and put it back in again. 2 If you have tried "Eject" from within Windows®, take out the memory card or USB Flash drive before you continue. 3 If an error message appears when you try to eject the memory card or USB Flash drive, it means the card is being accessed. Wait a while, and then try again. 4 If all of the above do not work, turn off your PC and machine, and then turn them on again. Make sure that you have correctly inserted the memory card or USB Flash drive. Make sure that Borderless printing and Cropping are turned off. (See Advanced User's Guide: Borderless printing and Cropping.) Software Difficulties Difficulty Cannot install software or print. "Device Busy" Suggestions (Windows®) Run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair and reinstall the software. Make sure the machine is not showing an error message on the Touchscreen. Network Difficulties Difficulty Suggestions Cannot print over the network. Make sure that your machine is powered on and is online and in Ready mode. Print a Network Configuration list (see Advanced User's Guide: Reports.) and check the current Network settings printed in this list. Reconnect the LAN cable to the hub to verify that the cabling and network connections are good. If possible, try connecting the machine to a different port on your hub using a different cable. If the connections are good, the machine shows LAN Active for 2 seconds. If you are using a wireless connection or are having Network problems, see Software and Network User's Guide: Troubleshooting. The network scanning feature does not work. It is necessary to configure the third-party Security/Firewall Software to allow Network scanning. To add port 54925 for Network scanning, enter the information below: In Name: Enter any description, for example Brother NetScan. In Port number: Enter 54925. In Protocol: UDP is selected. Please refer to the instruction manual that came with your third-party B Security/Firewall Software or call the software manufacturer. (Macintosh) Select Other from the Model drop-down list in the main screen of ControlCenter2. In the Device Selector window, make sure Network is selected in the Connection Type, and then click Browse. Reselect your network machine, and press OK. 137