Brother International MFC-J6920DW Basic Users Guide - Page 136
cord. Hold down, the print head. Re-connect the power
![]() |
View all Brother International MFC-J6920DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
f Using both hands, use the finger holds on each side of the machine to lift the scanner cover (1) into the open position. 1 h Move the print head (if necessary) to take out any paper remaining in this area. Make sure that jammed paper is not left in the corners of the machine (1) and (2). 2 1 g Slowly pull the jammed paper (1) out of the machine. 1 IMPORTANT • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper. • If the print head is in the right corner as shown in the illustration, you cannot move the print head. Re-connect the power cord. Hold down until the print head moves to the center. Then unplug the machine from the power source and take out the paper. • If ink gets on your skin or clothing, immediately wash it off with soap or detergent. 122
![](/manual_guide/products/brother-international-mfcj6920dw-basic-users-guide-3c7f8b0/136.png)