Brother International andtrade; QL-500 Users Manual - English - Page 15
Button descriptions, LED Lamp, Button, Condition
View all Brother International andtrade; QL-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
z GETTING STARTED Button descriptions The functions of the buttons on the QL-500/550 are described below. Button ON/OFF button CUT button (QL-550 only) FEED button Condition Turns power to the QL-500/550 on and off. Cuts the label from the DK Roll. Use this button to cut labels when the "Auto Cut" option in the Print dialog box is unchecked. • When using DK Die-cut Labels, feeds the DK Label Roll to the beginning of the first label on the roll. If this button is held for more than one second, the DK Label Roll is fed to the beginning of the next label on the roll. • When using DK Continuous Tapes, feeds 1" (25.4 mm) of the DK Label Roll. • If there is no DK Label Roll installed, the mode changes to a cleaning mode and the roller rotates for 1/3" (8 mm). If this button is held for more than one second, the roller rotates for 4" (100 mm). LED Lamp LED lamp on the QL-500/550 indicates the current operating condition. Lamp Not lit Power is OFF. Condition Lit Flashing fast Flashing slow Power is ON. (Normally lit while power is on, the LED flashes during cleaning or if an error has occurred.) Indicates one of the following errors. • Cutter error • Label sensor error (DK Roll not installed correctly, end of DK Roll, or label jam) • DK Roll compartment cover is open during operation • Incorrect DK Roll installed • No DK Roll installed Cooling (Waiting for temperature of print head to lower) Turns off after flashing fast ten times System error Turn the QL-500/550 off and then on again. If this error re-occurs, contact the retail outlet where the QL-500/550 was purchased or your local authorized service center. 11 QL-500/550 Components