Canon Color imageCLASS X LBP1127C imageCLASS X LBP1127C User Guide - Page 46

Setting Up Configuring WSD 1 Select [WSD Settings] [Edit]. 2 Configure the settings as necessary. [Use WSD Printing] Select the check box to print via WSD. When not using WSD printing, clear the check box. [Use WSD Browsing] Select the check box to obtain information about the machine from a computer via WSD. This check box is automatically selected when the [Use WSD Printing] check box is selected. [Use Multicast Discovery] Select the check box to set the machine to reply to multicast discovery messages. If the check box is cleared, the machine stays in sleep mode even when multicast discovery messages are flowing on the network. 3 Click [OK]. 5 Restart the machine. Restarting the Machine(P. 89) Selecting settings from the operation panel ● LPD, RAW, and WSD settings can also be accessed from in the Home screen. (P. 284) (P. 284) (P. 284) Setting up WSD network devices ● The WSD network devices can be added from the printer folder. Open the printer folder ( Displaying the Printer Folder(P. 436) ) click [Add a device] or [Add a printer] and follow the on-screen instructions. For more information about how to install the driver for the WSD network, see the manuals for the relevant drivers on the online manual website. To change the port number ● The same port number used for the machine and a computer must be used for printing protocol. Configuring Printer Ports(P. 42) Changing Port Numbers(P. 209) 40