Canon EOS 30D Digital Photo Professional Instruction Manual Macintosh (EOS 30D - Page 45

Click White Balance Function Makes white the standard for the point you selected and color in the image is adjusted. 1 Click the [Click] button. ¿ When you move the cursor over the image, the cursor [ ] changes to [ ]. 2 Click the point where is to be the standard. Adjusting the Luminance and Contrast You can adjust the luminance and contrast in the range of -100 to +100 (in 1-stop increments when entering a value). Adjust an image while viewing it. Drag the slider left or right to adjust the luminance and contrast. Enter a value to adjust the luminance and contrast. Adjusting the Color Tone, Color Saturation and Sharpness You can adjust the color tone in the range of -30 to +30 (in 1-step increments when entering a value), the color saturation in the range of 0 to 200 (in 1-step increments when entering a value) and the sharpness in the range of 0 to 500 (in 1-step increments when entering a value). Adjust an image while viewing it. Drag the slider left or right to adjust the color tone, color saturation sharpness. Restores the image to its original settings. Enter a value to adjust the color tone, color saturation and sharpness. Cover/Table of Contents Introduction 1 Displaying Thumbnail Images and Performing Basic Edits in the Main Window 2 Performing Detailed Edits in the Edit Window 3 Performing Detailed Edits in the Edit Image Window 4 Checking an Image in the Quick Check Window ¿ The color in the image is adjusted with white as the standard on the point you selected. O If you click on another point over the image, the white balance is adjusted again. O When you finish this operation, click the [Click] button. O The image is adjusted based on the value of 1  1 pixels from the clicked point. O Even if you have selected a neutral gray point of the image, the result of adjustments is the same as when you select a white point. Troubleshooting Shortcut Key List Index 2-10