Canon PIXMA MG2120 User Manual - Page 278

Forwarding Scanned Data to the Computer Using the Operation Panel of the M... Page 278 of 731 pages Home > Scanning > Scanning with Using the Operation Panel of the Machine > Forwarding Scanned Data to the Computer Using the Operation Panel of the Machine U051 Forwarding Scanned Data to the Computer Using the Operation Panel of the Machine You can forward the scanned data to the computer using the operation panel of the machine. The machine detects the type of the originals loaded on the platen glass automatically and the image is forwarded to the computer in the optimized size and resolution. Important Load originals properly according to their type; otherwise, some originals may not be scanned properly. For details on how to load the original on the platen glass: Loading Originals The following items can be scanned: Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDs The following items cannot be scanned properly. A4 sized photos Documents smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a paperback with its backbone cut off Originals on thin white paper Long and narrow originals such as panoramic photographs Before forwarding scanned data to the computer, confirm the following: The necessary application software (MP Drivers and MP Navigator EX) is installed. If the application software (MP Drivers and MP Navigator EX) is not yet installed, insert the Setup CDROM into the computer's disc drive, then install MP Drivers and MP Navigator EX. The machine is connected to a computer correctly. Make sure that the machine is connected to the computer correctly. Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the sleep or standby mode. The destination and the file name are specified in MP Navigator EX. You can specify the destination and the file name in MP Navigator EX. For details on settings of MP Navigator EX: Scanner Button Settings Tab (Save to PC) Note When scanning with using the operation panel of the machine, the document type is automatically detected and the settings in document size and resolution are automatically set. 1. Make sure that the machine is turned on. Confirming that the Power Is On 2. Load the original on the platen glass. Loading Originals 3. Press the SCAN button. Scanning starts and the images are forwarded to the computer according to the settings specified in