Canon PIXMA MG2120 User Manual - Page 29

Printing Disc Labels and Case Covers The Print Settings screen appears. Page 29 of 731 pages Important When Printable Disc is selected for Print Type in the Page Setup screen, if a printer that supports disc label printing is not installed, you cannot display the Print Settings screen. 13. Set Media Type, Paper Source, etc. according to the printer and paper to be used. Note When Printable Disc is selected for Print Type in the Page Setup screen, only Disc tray will be selectable for Paper Source. When Printable Disc is selected for Print Type in the Page Setup screen, Print Position... appears. In the Adjust Print Position dialog box that appears by clicking it, you can adjust the print position on the disc label. The media types may vary depending on the printer and the print type. The paper sources may vary depending on the printer and the media type. You can set a custom print quality level in the Print Quality Settings dialog box. To display the Print Quality Settings dialog box, select Custom for Print Quality and click Quality Settings.... You can specify the print range in the Print Settings dialog box. To display the Print Settings dialog box, click Advanced.... 14. Click Print in the step button area on the left side of the screen. Note When Case Cover is selected for Print Type in the Page Setup screen, crop marks (reference lines for trimming the image to its final size) are printed on the four corners of the print area. After printing, trim along the crop marks. Crop marks may not be printed depending on the selected target item and paper size.