Canon PIXMA MG2120 User Manual - Page 534
of 731 s, An Error Code Is Displayed on the LED - alarm lamp
View all Canon PIXMA MG2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 534 highlights
An Error Code Is Displayed on the LED Page 534 of 731 pages are clogged. Print the nozzle check pattern to check the status of the print head. Printing the Nozzle Check Pattern If the error is not resolved, connect the machine to the computer and align the print head on the printer driver. Aligning the Print Head Position from Your Computer Alarm Lamp Flashes Orange When the Alarm lamps flashes and the error code as follows is displayed on the LED, an error requiring servicing might have occurred. P, 0, 2 Error Code (LED display) P, 1, 0 Action Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE cartridge holder from moving, and turn on the machine again. Important Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it. If the problem is not resolved, contact the service center. Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center. (LED display) Other cases than above: Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center. Page top