Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 100
Loading Rolls in the Printer
![]() |
View all Canon imagePROGRAF TZ-30000 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Loading Rolls in the Printer Follow these steps to load rolls in the printer. When selecting Enable in Roll paper auto feed, the roll paper is fed automatically by simply loading it. Important • Roll paper cannot be loaded when the basket is being used. Stow the basket and close the accessory drawer when loading roll paper. Using the Basket on the Front of the Printer • Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be advanced correctly when you turn the printer on. • Before loading a roll, confirm whether the inside of the inner cover or the front output guide is soiled. If these areas are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover."). (See "Cleaning the Printer Exterior."). • If Paper retention settings is set to Release, the roll paper is not fed automatically. • For details on the paper that can feed roll paper automatically, see "Paper Information List." Note • Roll paper can be loaded in the upper and lower feed slots. The procedure for loading the roll paper is the same for the upper and lower feed slots. The following describes the procedure for loading the roll paper in the upper feed slot. • When roll paper cannot be fed automatically, see "Roll Paper Is not Switched Automatically." 1. Tap paper settings display area on Home screen of touch screen. Note • If the Home screen does not appear, tap the HOME button. • When selecting Enable in Roll paper auto feed. Go to step 2. 100
![](/manual_guide/products/canon-imageprograf-tz30000-imageprograf-tz30000-tz5300-series-user-manual-8e824a3/100.png)