Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 107

• When selecting Enable in Roll paper auto feed. The roll paper is fed. • When selecting Disable in Roll paper auto feed. Tap Start feeding, and then the roll paper is fed. Important • Depending on the surrounding environment, the leading edge of roll paper is stuck because of static electricity or humidity so that the roll paper may not be able to be fed correctly. In this case, set Roll paper auto feed to Disable, and then feed the roll paper. • If the roll paper is not straight and centered, it may not feed correctly. In this case, set Roll paper auto feed to Disable before feeding. • When Roll paper auto feed is Enable and if you attach the roll holder without the roll paper loaded on the roll holder, Preparing to feed the paper... appears on the operation panel. In this case, press the Stop button on the operation panel to cancel feeding. Once paper feeding starts, you will need to do the following, based on the Manage remaining roll amount setting, the barcode printed on rolls, and the Media type selection method setting. (See "Keeping Track of the Amount of Roll Paper Left.") 107