Canon imagePROGRAF TZ-30000 MFP Z36 imagePROGRAF TZ-30000 / TZ-5300 series Use - Page 435

Adjusting Line Length To ensure that lines in CAD drawings are printed at exactly the right length, use Adjust feed length to adjust the amount that paper is advanced. • This can be adjusted for each output destination. Adjusting Feed Amount (Top) Adjusting Feed Amount (Front) Note • We recommend executing the adjustment if you have changed the paper type or paper size. • Always check the Set priority values before adjustment. Selecting Feed Amount Adjustment Method Adjusting Feed Amount (Top) Items to Prepare When Using Rolls • An unused roll at least 254.0 mm (10.00 in) wide • High-precision ruler Important • Make sure the paper output support and top output guide are installed. The printed adjustment pattern may fall out of the paper output tray. Follow the procedure below to adjust. 1. Load paper. Loading Rolls in the Printer Important • Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be completed correctly unless the loaded paper matches the settings. 2. Flick HOME screen and tap Maintenance. Home Screen Menu Composition 3. Tap Paper feed adjustment. 4. Tap Adjust feed length (top). 5. Tap Print alignment pattern. 6. Tap paper to adjust. 435